Polycrystalline Mullite Fiber Board
Polycrystalline mullite fiberboard is a plate‑shaped high‑temperature refractory product made primarily from high‑purity polycrystalline mullite fibers, produced via vacuum filtration or pressure molding. As a deeply processed sheet product derived from Al₂O₃–SiO₂ ceramic fibers, it exists in the form of a single mullite crystalline phase and can withstand operating temperatures as high as 1500–1700°C—200–400°C higher than conventional glassy‑phase fibers. It is widely used as thermal insulation lining for high‑temperature industrial kilns and other heat‑processing equipment in fields such as metallurgy, machinery, electronics, ceramics, chemical engineering, and aerospace, with the aim of achieving energy savings, increased production, extended furnace life, and improved working conditions. The board has a white appearance, a smooth surface, uniform dimensions, and self‑supporting strength, resembling lightweight refractory panels.
Category:
Fiberboard
The company’s products feature numerous technological achievements and innovative, practical technologies. We manufacture polycrystalline mullite fiber fireproof boards, polycrystalline alumina fiber furnace linings, ceramic fiber furnace linings, polycrystalline mullite fiber furnace linings, and crystalline fibers.
E-mail:ncjt@zjncjt.com
Product Description
1. Product Description:
Polycrystalline mullite fiberboard is a board‑shaped product developed to meet the needs of planar thermal insulation and structural support in high‑temperature industrial kilns and other thermal processing equipment. It is made from polycrystalline mullite fiber cotton produced via the chemical “colloidal method,” with a chemical composition of 72% Al₂O₃ and 28% SiO₂, and its primary crystalline phase is pure mullite. After crushing, slag removal, and the addition of inorganic binders, the material undergoes wet vacuum filtration and pressure molding, followed by high‑temperature heat treatment to complete the crystalline phase transformation. Its service temperature can reach 1500–1700°C, which is 200–400°C higher than that of conventional aluminosilicate fiber. It can be widely used for thermal facing and back‑lining insulation in furnace linings across industries such as metallurgy, chemical engineering, electronics, and aerospace. Standard dimensions are 1000×600×20–100 mm, though custom sizes are available upon request. The product has a white appearance, a smooth surface, uniform bulk density, and self‑supporting strength, resembling lightweight refractory boards.
2. Product Features:
Due to their unique manufacturing process and crystalline phase structure, polycrystalline mullite fiber boards possess a range of characteristics that significantly outperform traditional heavy-duty refractory materials and conventional glassy fiber products.
Low Thermal Conductivity and High Insulation: Inheriting the low thermal capacity and low thermal conductivity characteristics of fiber materials, this product boasts a thermal conductivity as low as 0.15–0.24 W/(m·K) at 1200°C, delivering remarkable insulation performance and excellent energy-saving benefits—its thermal conductivity is approximately one-sixth that of conventional firebricks.
Excellent high-temperature stability: The product exists in a single mullite crystalline phase, exhibiting low thermal expansion during heating within its operating temperature range—linear shrinkage ≤1.0% after 24 hours at 1500°C—and boasts excellent volumetric stability, allowing it to operate reliably for extended periods at temperatures between 1500 and 1700°C.
Lightweight and High Strength: The product has a bulk density of only 300–500 kg/m³, which is far lower than that of traditional firebricks (about 1/25). At the same time, the vacuum forming process imparts excellent compressive strength and structural rigidity to the product, resulting in a tough and durable texture.
Thermal Shock Resistance and Chemical Stability: The fibrous structure endows the material with excellent thermal shock resistance, enabling it to withstand rapid heating and cooling without cracking. It exhibits good wetting resistance against most molten metals, boasts outstanding corrosion resistance, and is highly resistant to erosion caused by gas flow.
Easy to Process and Install: The product can be cut and drilled using standard woodworking tools, making on-site construction and installation convenient. With standardized specifications, it can also be custom‑made to non‑standard dimensions according to drawings, ensuring easy installation and use.
3. Product Applications
Widely used as thermal insulation for the lining of high‑temperature electric furnaces, silicon carbide electric furnaces, and molybdenum silicide electric furnace linings; as lining materials for ceramic kilns, tunnel kilns, and roller hearth kilns; as thermal facing and back‑up insulation layers in industrial kilns for metallurgy, machinery, chemical engineering, glass, and other industries; as inner linings for specialized high‑temperature equipment such as ceramic sintering furnaces, magnetic material heat treatment furnaces, and sapphire growth furnaces; as thermal insulation materials for kiln doors, kiln cars, expansion joints, and other components; as well as thermal insulation materials for applications in building fire protection and high‑temperature filtration.
Previous page
Next page
Previous page
Next page
Recommend products
Online consultation